High-Precision Infrared Forehead Clinical Thermometer

FDA Approved! High-Precision Infrared Forehead Clinical Thermometer Model - YHKY2000

Features:

• Equipped with exceptional micro-chip and high sensitivity sensor
• User-Friendly operation, point the thermometer to forehead and Press the button, you can get the readings instantly.
• Large LCD display with tri-color back lights and abnormal alarm
• Non-contact measurement, avoid across infection.
• Body/Object dual mode
• With China Medical Device Registration

• Device Name : Infrared Thermometer
• Model :YHKY2000
• Measurement Mode : Object / Body
• Power Supply : D.C.3V, 2 AAA batteries (NOT INCLUDED)
• Measuring Range :
  • For forehead temperature: 35.0-42.9℃
  • For object surface temperature: 0-93℃
• Measuring Accuracy (At laboratory conditions) :
  • For forehead temperature: ± 0.2 during 34. 0℃ -42.0℃ / ± 0.3 during 42.1℃ -43.0℃
  • For object surface temperature: ± 1.0℃ during 15℃ -60℃ / ± 2.0℃ during other ranges
• Clinical Repeat ability : Within ±0.3℃
• Resolution of Display : 0.1℃/0.1℉
• Operation Condition : 16-40℃, Relative humidity ≤Rh95%, 70-106KPa
• Storage Condition : -25-55℃, Relative humidity ≤Rh95%, 70-106KPa
• Size : 136 X 76.5 X 38 mm
• Weight : About 100g
• High Body Temperature Hint : ≥37.5℃
• Grade of Waterproof : IP22
• Electric Shock : Internally powered ME equipment
• Applied Part : Type BF applied part, including the whole unit
• Mode of Operation : Continuous operation
• Memorizing Date : 50 set
• Standard : EN60601-1,EN 12470-5 ,ASTM E 1965-98

Usage:

1. Insert AAA batteries (AAA) into the bottom of the thermometer.
2. Keep the thermometer at a distance of 5 to 8 cm according to your forehead.
3. Select the mode (human / object) and pull the trigger.
4. When measurement is completed, the data will be shown.

Body temperature measurement mode:

• Pull the trigger to activate the thermometer.
• Change the measurement mode to the body temperature measurement mode.
• Place the thermometer 5-8 cm in front of the forehead and pull the trigger. After about 1 second, the sound of 'di' sounds and the result is output. If it exceeds the measurement range (above 38 ℃), it will sound 'di..didi'.
• It turns off automatically about 30 seconds after the completion of measurement.

Object temperature measurement mode:

• Pull the trigger to activate the thermometer.
• Change the measurement mode to the object temperature measurement mode.
• Place the thermometer 5-8 cm away from the object you want to measure and pull the trigger. After about 1 second, the sound of 'di' sounds and the result is output.
• It turns off automatically about 30 seconds after the completion of measurement.
• The result is the surface temperature of the object.
• There is a deviation when measuring stainless steel. Please be careful.

Prohibited matter:

• Do not put the thermometer in the liquid.
• Please do not leave for a long time in high temperature, low tone, and moist place.
• Do not touch the place that emits infrared rays with your finger.
• Do not dismantle the thermometer.

Notes:

• Clean the thermometer before and after use.
• There is a deviation when we measure within 30 minutes after exercise, meal, bathing.
• Please wait about 10 seconds when repeating the measurement.
• Keep out of reach of children.
• If you are using a non-contact thermometer for the first time, the operation may be incorrect and the result may be wrong.
• If the ambient temperature changes greatly (from indoor to outdoor), measure after about 30 minutes.
• Do not measure body temperature immediately after measuring high or low temperature objects.

Button does not respond:

1. Remove the battery and insert it again.
2. Check if you have operated the setting menu.